FLERO Essence aroma diffuser

300 ml tank, 7 colours, timer and remote control.

Versions

3-year warranty

Create the certificate with your eMAG order number.

Getting started

Take off the cover and fill the tank with clean water up to the MAX line (300 ml), no higher.
Add a few drops of pure, natural, water-soluble essential oil.
Put the cover back and connect the USB-C cable to a 5 V 2 A charger.
MIST button: the first press starts continuous mist; further presses step through intermittent (10 s), 2 hours, 4 hours and off.
LIGHT button: the first press starts the colour cycle; further presses fix the colour. Hold for 3 seconds to turn the light off.
On the remote, BIG/SMALL changes the amount of mist (1 beep: small, 2 beeps: big) and TIMING picks 2 hours, 4 hours or continuous.

No mist, or very little

Check the water level: not too low and not above the MAX line. Wipe the nebulizer with a soft, dry cloth.

The diffuser won't switch on

Unplug and reconnect the cable. Use the original USB-C cable and a standard 5 V 2 A charger; an unsuitable charger can give weak mist or none.

Which oils can I use?

Only pure, natural, water-soluble essential oils. Switch the diffuser off before adding water.

Change the water often. Water left standing can grow microorganisms that end up in the air; ideally clean the diffuser every 3 days.
Cleaning: unplug, empty the water, add 100 ml of warm water (up to 70 °C) with 2–3 drops of vinegar, leave for 5 minutes, shake gently and empty.
Wipe the tank and nebulizer with a soft, dry cloth.
If you won't use it for a while, store it clean and dry.

Contact

Send us your order number and what happened. We usually reply the same day, at the latest on the next working day.